Ask the Scholar

Page 1 of 2
I can add historical knowledge about this page.

Page image

Page 1

OCR

Dr. Paul D. Berrisford, 810 Lowry Bldg., St. Paul, llinn. Dear Dr. Berrisford: Dr. Lind has written me relative to your interest in the use of radium luminous disca as a weak light source. Dr. Lind has ably advised you relative to the physical charactaristics of our luminous compound. The light intensity of this material decreases with time, and while it is true that the higher grades of our Undark self luminous naterial has a nore rapid decrease than the lower grades, still I doubt if our lower grades would present a uniform enough source of light to be of much value in your work. Even the material whech has stood for a considerable period of tine and had an opportunity to age, so to speak, would still have an appreciable decay curve. I infer from Dr. Lind's letter that you are interested in a fairly constant weak light source, and if such is the case there is considerable question in By mind regarding the feasibility of using radium luminous compound. I an, however, having our Bechanical Department paint up a few disos which we will forward to you during the next few days under separate cover, for your experimentation. The intensity of light from the lower grade dise will probably remain quite constant over a short period of time, but after soveral months will show some change. In connection with problem presented, I am wondering if the best solution would not be to utilize a very woak light source such as may be obtained with the proper set up of resistance etc. In this connection we have designed a pince of equipment for reading our luminous matorial which might very well be adapted to your use. The intensity of the light from this apparatus is of the order of magnitude, naturally of the luminous compound. The light intensity may be veried anywhore from one to 250 microlamberts. This apparatus we have galibrated against a known light source and when in use it would be necessary to check this calibration oceasionaly on account of deterioration of the fildments in the lamp. This would not be difficult, however as the apparatus could be supplied with accessory equipment so that it would be possible to have the calibration checked by a suitable laboratory with- out interforring with the daily uso of the equipment. If you should be interested in this type of equipment I would be glad to go into the matter in more detail with you. Very truly yours, HHBarker:Ri Vice President.

Page data

Page
1
Source index
0
Type
photo
Media ID
d55dd954fd5356e4
Size
unknown

Document data

ID
75730655
Core
doc
Type
document
DTO data
{
    "id": "75730655",
    "sourceUrl": "https://catalog.archives.gov/id/75730655",
    "contentType": "document",
    "title": "Letters Sent to Mr. Markley [E.A. Markley], no date",
    "citationUrl": "https://catalog.archives.gov/id/75730655",
    "collections": [
        "Safety Light Collection",
        "Records Related to Radium Dial Painters"
    ],
    "iiifBase": "https://s3.amazonaws.com/NARAprodstorage/lz/electronic-records/SLC/Radium/SLC_0003676.jpg",
    "thumbnailUrl": "https://s3.amazonaws.com/NARAprodstorage/lz/electronic-records/SLC/Radium/SLC_0003676.jpg",
    "largeImageUrl": "https://s3.amazonaws.com/NARAprodstorage/lz/electronic-records/SLC/Radium/SLC_0003676.jpg",
    "imageCount": 2,
    "hasImages": true,
    "source": "import",
    "hasTranscription": false
}

Context sent to Scholar

Document identity
{
    "localId": "75730655",
    "label": "Letters Sent to Mr. Markley [E.A. Markley], no date",
    "core": "doc",
    "dtoType": "document",
    "citationUrl": "https://catalog.archives.gov/id/75730655"
}
Document source metadata
{
    "id": "75730655",
    "sourceUrl": "https://catalog.archives.gov/id/75730655",
    "contentType": "document",
    "title": "Letters Sent to Mr. Markley [E.A. Markley], no date",
    "citationUrl": "https://catalog.archives.gov/id/75730655",
    "collections": [
        "Safety Light Collection",
        "Records Related to Radium Dial Painters"
    ],
    "iiifBase": "https://s3.amazonaws.com/NARAprodstorage/lz/electronic-records/SLC/Radium/SLC_0003676.jpg",
    "thumbnailUrl": "https://s3.amazonaws.com/NARAprodstorage/lz/electronic-records/SLC/Radium/SLC_0003676.jpg",
    "largeImageUrl": "https://s3.amazonaws.com/NARAprodstorage/lz/electronic-records/SLC/Radium/SLC_0003676.jpg",
    "imageCount": 2,
    "hasImages": true,
    "source": "import",
    "hasTranscription": false
}
Document source extras
{
    "url": "https://catalog.archives.gov/id/75730655",
    "naId": 75730655,
    "levelOfDescription": "fileUnit",
    "recordType": "description",
    "ocrSource": "nara-archive"
}
Page context
{
    "seq": 1,
    "pageIndex": 0,
    "type": "photo",
    "url": "https://s3.amazonaws.com/NARAprodstorage/lz/electronic-records/SLC/Radium/SLC_0003676.jpg",
    "mediaId": "d55dd954fd5356e4",
    "ocrText": "Dr. Paul D. Berrisford,\n810 Lowry Bldg.,\nSt. Paul, llinn.\nDear Dr. Berrisford:\nDr. Lind has written me relative to your interest in\nthe use of radium luminous disca as a weak light source.\nDr. Lind has ably advised you relative to the physical\ncharactaristics of our luminous compound. The light intensity of this\nmaterial decreases with time, and while it is true that the higher grades\nof our Undark self luminous naterial has a nore rapid decrease than the\nlower grades, still I doubt if our lower grades would present a uniform\nenough source of light to be of much value in your work. Even the\nmaterial whech has stood for a considerable period of tine and had an\nopportunity to age, so to speak, would still have an appreciable decay curve.\nI infer from Dr. Lind's letter that you are interested\nin a fairly constant weak light source, and if such is the case there is\nconsiderable question in By mind regarding the feasibility of using radium\nluminous compound. I an, however, having our Bechanical Department paint\nup a few disos which we will forward to you during the next few days under\nseparate cover, for your experimentation.\nThe intensity of light from the lower grade dise will\nprobably remain quite constant over a short period of time, but after\nsoveral months will show some change.\nIn connection with problem presented, I am wondering if\nthe best solution would not be to utilize a very woak light source such as\nmay be obtained with the proper set up of resistance etc. In this connection\nwe have designed a pince of equipment for reading our luminous matorial which\nmight very well be adapted to your use. The intensity of the light from\nthis apparatus is of the order of magnitude, naturally of the luminous compound.\nThe light intensity may be veried anywhore from one to 250 microlamberts.\nThis apparatus we have galibrated against a known light source and when in use\nit would be necessary to check this calibration oceasionaly on account of\ndeterioration of the fildments in the lamp. This would not be difficult,\nhowever as the apparatus could be supplied with accessory equipment so that it\nwould be possible to have the calibration checked by a suitable\nlaboratory\nwith-\nout interforring with the daily uso of the equipment.\nIf you should be interested in this type of equipment I\nwould be glad to go into the matter in more detail with you.\nVery truly yours,\nHHBarker:Ri\nVice President."
}