Ask the Scholar

Page 2 of 2
I can add historical knowledge about this page.

Page image

Page 2

OCR

Ple.Sile March 17, 1936. Dr. Robley D. Evans, Massachusetts Institute of Technology, Cambridge, Mass. Dear Dr. Evens: The writer finds your letter of February 17, with sketch of the device you wish to use for experiments, attached. We are not prepared to make up the unit as shown. However, if you would send us the cylinder constricted at both ends for introduction of the electrodes, we would be glad to put 8 coating of redio-active material on the inside of such cylinder. We, however, would have to have an opening of approximately 1/4" at the points where the electrodes are to be inserted. You probably have better facilities for making up the unit than we have, as it would be necessary for us to have the work done by an outside concern, and that, of course, would be costly. The cost of our work will almost fully depend upon the quantity of radio-active material to be used to coat the inside of the cylinder. If you can give us some idea as to the activity, expressed in milli- grams, that you would desire to have, we would be glad to quote you a price. Very truly yours, HHBarker:DK Vice-President

Page data

Page
2
Source index
0
Type
document
Media ID
40b580ae27714e17
Size
unknown

Document data

ID
75729314
Core
doc
Type
document
DTO data
{
    "id": "75729314",
    "sourceUrl": "https://catalog.archives.gov/id/75729314",
    "contentType": "document",
    "title": "Letters Sent to Dr. Robley D. Evans, March 17, 1936",
    "citationUrl": "https://catalog.archives.gov/id/75729314",
    "collections": [
        "Safety Light Collection",
        "Records Related to Radium Dial Painters"
    ],
    "iiifBase": "https://s3.amazonaws.com/NARAprodstorage/lz/electronic-records/SLC/Radium/SLC_0003320.jpg",
    "thumbnailUrl": "https://s3.amazonaws.com/NARAprodstorage/lz/electronic-records/SLC/Radium/SLC_0003320.jpg",
    "largeImageUrl": "https://s3.amazonaws.com/NARAprodstorage/lz/electronic-records/SLC/Radium/SLC_0003320.jpg",
    "imageCount": 2,
    "hasImages": true,
    "source": "import",
    "hasTranscription": false
}

Context sent to Scholar

Document identity
{
    "localId": "75729314",
    "label": "Letters Sent to Dr. Robley D. Evans, March 17, 1936",
    "core": "doc",
    "dtoType": "document",
    "citationUrl": "https://catalog.archives.gov/id/75729314"
}
Document source metadata
{
    "id": "75729314",
    "sourceUrl": "https://catalog.archives.gov/id/75729314",
    "contentType": "document",
    "title": "Letters Sent to Dr. Robley D. Evans, March 17, 1936",
    "citationUrl": "https://catalog.archives.gov/id/75729314",
    "collections": [
        "Safety Light Collection",
        "Records Related to Radium Dial Painters"
    ],
    "iiifBase": "https://s3.amazonaws.com/NARAprodstorage/lz/electronic-records/SLC/Radium/SLC_0003320.jpg",
    "thumbnailUrl": "https://s3.amazonaws.com/NARAprodstorage/lz/electronic-records/SLC/Radium/SLC_0003320.jpg",
    "largeImageUrl": "https://s3.amazonaws.com/NARAprodstorage/lz/electronic-records/SLC/Radium/SLC_0003320.jpg",
    "imageCount": 2,
    "hasImages": true,
    "source": "import",
    "hasTranscription": false
}
Document source extras
{
    "url": "https://catalog.archives.gov/id/75729314",
    "naId": 75729314,
    "levelOfDescription": "fileUnit",
    "recordType": "description",
    "ocrSource": "nara-archive"
}
Page context
{
    "seq": 2,
    "pageIndex": 0,
    "type": "document",
    "url": "https://s3.amazonaws.com/NARAprodstorage/lz/electronic-records/SLC/Radium/SLC_0003320.pdf",
    "mediaId": "40b580ae27714e17",
    "ocrText": "Ple.Sile\nMarch 17, 1936.\nDr. Robley D. Evans,\nMassachusetts Institute of Technology,\nCambridge, Mass.\nDear Dr. Evens:\nThe writer finds your letter of February 17, with sketch\nof the device you wish to use for experiments, attached. We are\nnot prepared to make up the unit as shown. However, if you would\nsend us the cylinder constricted at both ends for introduction of\nthe electrodes, we would be glad to put 8 coating of redio-active\nmaterial on the inside of such cylinder. We, however, would have\nto have an opening of approximately 1/4\" at the points where the\nelectrodes are to be inserted. You probably have better facilities\nfor making up the unit than we have, as it would be necessary for\nus to have the work done by an outside concern, and that, of course,\nwould be costly.\nThe cost of our work will almost fully depend upon the quantity\nof radio-active material to be used to coat the inside of the cylinder.\nIf you can give us some idea as to the activity, expressed in milli-\ngrams, that you would desire to have, we would be glad to quote you\na price.\nVery truly yours,\nHHBarker:DK\nVice-President"
}