Ask the Scholar

Page 3 of 3
I can add historical knowledge about this page.

Page image

Page 3

OCR

DRS. Stevens, JARRE AND HASLEY 1429 DAVID WHITNEY BUILDING DETROIT ROLLIN H. STEVENS, M.D. RANDOLPH 4493 HANS A. JARRE, M.D. CLYDE K. HASLEY, M.D. EMIL M. SHEBESTA, M.D. October 11th-1939 U. S. Radium Corporation 535 Pearl Street New York, N. Y. OCT Attention Mr. Lee 1939 Gentlemen: I met one of your representatives from Los Angeles (I have mislaid his name) at our Detroit Rotary Club last week and learning his classification in the California Club I inquired about the cost of changing over some of my radium to larger denominations. He referred me to your Mr. C. B. Lee. What I have in mind is this: I have in the neighborhood of 48 mgs. in 2 mg. cells. These cells are of platinum iridium, have a wall thickness of .35 mm, a length of 13.1 mm and a dimeter of 1.29 mm. The radium contents vary of course with each fell from 1.5 to 1.9 mgs. I want all this changed over into four 10 mg. cells of platinum iridium which has a wall thickness of 1/2 mm. The length and diameter would have to be figured out accordingly. These tubes I want packed full so that the radium content will not slide around in different parts of the tube. I desire to use this radium particularly according to the method of Strandquist (Acta Radiologica P.1. Vol XX, Fasc. 1 #113 2/28/1939 and Vol XX, Fasc 2, # 114, 4/29/1939 P. 186) of Stockholm Radiumhemet, his plan being based upon the work of Sievert of the same institution. The method of using this is described in two recent numbers of Acta Rdaiologica above referred to. I am planning to have made the glass carriers such as he used which are 4-1/2 mms. in hickness in all directions, the sides being round and a hole being made in the center just sufficiently large to carry the 10 mg. needles. These glass units can then be placed in one or two rows. The distanceof radium to the skin cannot vary. Thus, the dose can be figured out accurately in r units with the help of a series of tables which we would have printed. This makes for much more accurate dosage than anything we have had yet. I also have 21 mgs. in 3 mg. needles which have a wall thickness of about 0.15 mm and are platinum iridium. These would be added to the rest of the radium which would give me two additional needles as I have described and a few mgs. left over to which I might add enough radium to make another 10 mg. needle. I also have some 10 mg. needles in monel metal which I presume I would better change over to the platinum inasmuch as I could standardize my doses better with the 1/2 mm of platinum wall. I also have several 5 mg needles in platinum and in monel metal which I might consider changing DRS. STEVENS, JARRE AND HASLEY 1429 DAVID WHITNEY BUILDING DETROIT ROLLIN H. STEVENS, M.D. RANDOLPH 4493 HANS A. JARRE, M.D. CLYDE K. HASLEY, M.D. EMIL M. SHEBESTA, M.D. Page 2 - - U. S. Radium Corporation if the expense is not too heavy. I have also some 6.6 and 13.2 mg which are in platinum cells but which I find are not filled tightly so that the radium slides around inside as much as 3 or 4 mms. These I might leave as they are except to open them up and pack them tightly so that I can figure my dosage more accurately. Can you give me some idea as to what would be the cost of doing some of this work which 1 presume you are equipped to do. Thanking you, I am Yours very truly Rollin H. Stevens RHS-EBL

Page data

Page
3
Source index
0
Type
document
Media ID
7f7db85ace0f5816
Size
unknown

Document data

ID
75729669
Core
doc
Type
document
DTO data
{
    "id": "75729669",
    "sourceUrl": "https://catalog.archives.gov/id/75729669",
    "contentType": "document",
    "title": "Letters Received to Mr. Lee [C.B. Lee], October 11, 1939",
    "citationUrl": "https://catalog.archives.gov/id/75729669",
    "collections": [
        "Safety Light Collection",
        "Records Related to Radium Dial Painters"
    ],
    "iiifBase": "https://s3.amazonaws.com/NARAprodstorage/lz/electronic-records/SLC/Radium/SLC_0003416_Page_1.jpg",
    "thumbnailUrl": "https://s3.amazonaws.com/NARAprodstorage/lz/electronic-records/SLC/Radium/SLC_0003416_Page_1.jpg",
    "largeImageUrl": "https://s3.amazonaws.com/NARAprodstorage/lz/electronic-records/SLC/Radium/SLC_0003416_Page_1.jpg",
    "imageCount": 3,
    "hasImages": true,
    "source": "import",
    "hasTranscription": false
}

Context sent to Scholar

Document identity
{
    "localId": "75729669",
    "label": "Letters Received to Mr. Lee [C.B. Lee], October 11, 1939",
    "core": "doc",
    "dtoType": "document",
    "citationUrl": "https://catalog.archives.gov/id/75729669"
}
Document source metadata
{
    "id": "75729669",
    "sourceUrl": "https://catalog.archives.gov/id/75729669",
    "contentType": "document",
    "title": "Letters Received to Mr. Lee [C.B. Lee], October 11, 1939",
    "citationUrl": "https://catalog.archives.gov/id/75729669",
    "collections": [
        "Safety Light Collection",
        "Records Related to Radium Dial Painters"
    ],
    "iiifBase": "https://s3.amazonaws.com/NARAprodstorage/lz/electronic-records/SLC/Radium/SLC_0003416_Page_1.jpg",
    "thumbnailUrl": "https://s3.amazonaws.com/NARAprodstorage/lz/electronic-records/SLC/Radium/SLC_0003416_Page_1.jpg",
    "largeImageUrl": "https://s3.amazonaws.com/NARAprodstorage/lz/electronic-records/SLC/Radium/SLC_0003416_Page_1.jpg",
    "imageCount": 3,
    "hasImages": true,
    "source": "import",
    "hasTranscription": false
}
Document source extras
{
    "url": "https://catalog.archives.gov/id/75729669",
    "naId": 75729669,
    "levelOfDescription": "fileUnit",
    "recordType": "description",
    "ocrSource": "nara-archive"
}
Page context
{
    "seq": 3,
    "pageIndex": 0,
    "type": "document",
    "url": "https://s3.amazonaws.com/NARAprodstorage/lz/electronic-records/SLC/Radium/SLC_0003416.pdf",
    "mediaId": "7f7db85ace0f5816",
    "ocrText": "DRS. Stevens, JARRE AND HASLEY\n1429 DAVID WHITNEY BUILDING\nDETROIT\nROLLIN H. STEVENS, M.D.\nRANDOLPH 4493\nHANS A. JARRE, M.D.\nCLYDE K. HASLEY, M.D.\nEMIL M. SHEBESTA, M.D.\nOctober 11th-1939\nU. S. Radium Corporation\n535 Pearl Street\nNew York, N. Y.\nOCT\nAttention Mr. Lee\n1939\nGentlemen:\nI met one of your representatives from Los Angeles (I have mislaid\nhis name) at our Detroit Rotary Club last week and learning his\nclassification in the California Club I inquired about the cost of\nchanging over some of my radium to larger denominations. He referred\nme to your Mr. C. B. Lee.\nWhat I have in mind is this: I have in the neighborhood of 48 mgs.\nin 2 mg. cells. These cells are of platinum iridium, have a wall\nthickness of .35 mm, a length of 13.1 mm and a dimeter of 1.29 mm.\nThe radium contents vary of course with each fell from 1.5 to 1.9 mgs.\nI want all this changed over into four 10 mg. cells of platinum iridium\nwhich has a wall thickness of 1/2 mm. The length and diameter would\nhave to be figured out accordingly. These tubes I want packed full\nso that the radium content will not slide around in different parts of\nthe tube. I desire to use this radium particularly according to the\nmethod of Strandquist (Acta Radiologica P.1. Vol XX, Fasc. 1 #113\n2/28/1939 and Vol XX, Fasc 2, # 114, 4/29/1939 P. 186) of Stockholm\nRadiumhemet, his plan being based upon the work of Sievert of the same\ninstitution. The method of using this is described in two recent\nnumbers of Acta Rdaiologica above referred to. I am planning to have\nmade the glass carriers such as he used which are 4-1/2 mms. in hickness\nin all directions, the sides being round and a hole being made in the\ncenter just sufficiently large to carry the 10 mg. needles. These glass\nunits can then be placed in one or two rows. The distanceof radium to\nthe skin cannot vary. Thus, the dose can be figured out accurately in\nr units with the help of a series of tables which we would have printed.\nThis makes for much more accurate dosage than anything we have had yet.\nI also have 21 mgs. in 3 mg. needles which have a wall thickness of\nabout 0.15 mm and are platinum iridium. These would be added to the\nrest of the radium which would give me two additional needles as I have\ndescribed and a few mgs. left over to which I might add enough radium\nto make another 10 mg. needle.\nI also have some 10 mg. needles in monel metal which I presume I would\nbetter change over to the platinum inasmuch as I could standardize my\ndoses better with the 1/2 mm of platinum wall. I also have several 5 mg\nneedles in platinum and in monel metal which I might consider changing\nDRS. STEVENS, JARRE AND HASLEY\n1429 DAVID WHITNEY BUILDING\nDETROIT\nROLLIN H. STEVENS, M.D.\nRANDOLPH 4493\nHANS A. JARRE, M.D.\nCLYDE K. HASLEY, M.D.\nEMIL M. SHEBESTA, M.D.\nPage 2 - - U. S. Radium Corporation\nif the expense is not too heavy. I have also some 6.6 and 13.2 mg\nwhich are in platinum cells but which I find are not filled tightly\nso that the radium slides around inside as much as 3 or 4 mms. These\nI might leave as they are except to open them up and pack them tightly\nso that I can figure my dosage more accurately.\nCan you give me some idea as to what would be the cost of doing some\nof this work which 1 presume you are equipped to do.\nThanking you, I am\nYours very truly\nRollin H. Stevens\nRHS-EBL"
}